/ Miniature Unidirectional Condenser Boundary Microphone     

PRO42



mobile background
mobile background
mobile background
/ Overview

PRO42 Miniature Unidirectional Condenser Boundary Microphone



소형 단일지향성 콘덴서 바운더리 마이크로폰



Features

PRO42의 로우 프로파일(low-profile) 디자인은 회의실, 학교, 관공서, 예배당 및 기타 설치 환경에서 표면 부착 시 눈에 띄지 않도록 보장합니다. 음향 증폭, 방송 및 녹음용으로 설계된 PRO42는 연단, 무대, 회의 테이블 등에서 명료하고 이해하기 쉬운 오디오 재생을 제공합니다.
넓은 주파수 범위의 콘덴서 엘리먼트와 저질량 다이어프램을 탑재하여 뛰어난 성능을 제공하며, 외부 전원 모듈이 필요 없는 자체 전자 회로를 내장하고 있습니다.

  • 매우 낮은 프로파일 디자인으로 시각적 노출 최소화

  • 저질량 다이어프램을 사용한 광대역 콘덴서 엘리먼트로 탁월한 성능 제공

  • 균일한 지향 패턴으로 원치 않는 소리를 최대한 억제

  • 견고한 설계와 구조

  • 마이크와 XLRM 타입 커넥터 사이에 25'(7.6m) 길이의 케이블이 영구적으로 부착됨



Specifications
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response 70–14,000 Hz
Open Circuit Sensitivity -38 dB (12.5 mV) re 1V at 1 Pa
Maximum Input Sound Level 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 105 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements 9–52 V DC, 2 mA typical
Weight 1.2 oz (35 g)
Cable 25' (7.6 m) long, permanently attached
Dimensions 1.44" (36.6 mm) max width, 2.14" (54.3 mm) max length, 0.61" (15.5 mm) height
Output Connector 3-pin XLRM-type on cable
Output Connector 3-pin XLRM-type on cable
Accessories Included AT8146(WH) windscreen; AT8451(WH) steel hanger
Audio-Technica Case Style M21